Nucleon Micro FPV Racer

---

The Nucleon

inspired by Toothpick, Pickle, Phoenix Parkracer.
original canopy designed by Dave_C_FPV.

https://www.youtube.com/watch?v=Q4HrZ7dkAOM&t

[UPDATES STATED BELOW]

Features:
-Lipo Twist Mount (see Versions)

• for 11XX Motors
• 102mm motor to motor (diagonal)
• fits 2.5" props and the 65mm kingkong
• acessible USB port
• flightcontroller insulation mat
• no nuts/standoffs needed (stack: 4 x ~10mm M2)
• cloverleaf possible!
• ventilated pod/canopy to keep the insides cool
• fits EOS02 and similar cams
• trueX frame
• screwless lipo quickchange mount
• weight with alle electronics i used, no lipo: 58g
• all hardware inside the canopy: bulletproof to crashes

recommended parts:

• cut frame from 2mm carbon, find the DXF at the "thing files" section here.

• BetaFPV 2-4S 12A flightcontroller

• rxsr (if you use frsky) rx

• unify pro32 nano vtx

• eos02 cam

• any 11xx motors with 4-hole pattern of your liking (i used hypetrain "the dab" 1104)

• any 2.5" propeller or the "kingkong" 65mm (make sure, the propeller fits the motorshaft)

• XT30 powerconnector

thats different/new:

• wider motor holes, so all c-clips will fit
• wider USB access hole: reduce risk of touching the frame
• insulation mat for flightcontroller, no shorts, no smoke!
• micro cloverleaf integrated to the canopy
• screwless quick-change lipomount

Thanks to

Dave_C_FPV (canopy)
KabapFPV (Toothpick)
ledroneclub (Pickle)
www.fpv360.de
alexander hagen (Phoenix Parkracer)

where to buy (in GERMANY):

den frame fräst und verschickt euch gerne fpv360.de in bester qualität und schneller lieferung! lasst nen gruß da :)

UPDATE 1:
Added some lipomounts for slightly bigger 2S 450mAh Lipos (sample-item: mylipo 2s 450mAh 50/100c). They've also more stable anchoring since the 450mAh are more weighty then the 300mAh. Also added one mount with an optional XT30 slot to keep the wiring close to the copter - if you'd prefer so.

UPDATE 2:
Added the TWIST MOUNT to an alternative DXF File. Now you could use the LipoMounts like on the TWIG Frame (like those: https://www.thingiverse.com/thing:3773902)