June 17, 2019
Description
THIS IS A COMBINATION WITH THIS THING HERE:
Prusa MMU1.0 PTFE Tube Adapter - 4-7.4mm - https://www.thingiverse.com/thing:3696959
i'm feeding my stepper motors from the side of my enclosure with some 6mm PTFE Tubes.
cause the entrance is angled down, the tubes got in the way of the print area.
so i designed angled versions of the stepper motor holders / adapters attached to the frame.
printed with:
6 perimeters
5% infill
License:
Creative Commons - Attribution
educa_thor
