Mako Jetboard / JetSurf - Rack / Stand

Hi I designed a stand for a buddy for his mako slingshot jetboards. I haven't tested it yet but I think it should fit so well. I will print the parts in the next days and test them. The base of the stand is about 400 x 400mm. The height is about 880mm. Two 11mm rubber buffers are glued to the upper support directly underneath the jetboard. *You need:* - Printed parts ;-) - 4x screws 3,5x12 or 3,0x12 ( to screw the upper support together.) - 4x screws 3,5x45 or 3,5x50 ( to squeeze the foot ) - 4x aluminium tube length 1000mm outer diameter 16mm wall thickness 2mm - 4x 11mm rubber buffers *Note:* - The holes for the screws must be drilled exactly in the middle of the aluminum rod. **Happy printing** MFG Chris ---------------- If you like it ;)