T16 stick protectors - Magnet Clip

Stick protectors for the newly released Jumper T16!!
These are intended to snap to the set screw of the gimbals with a magnet to keep them neatly into place.
These stick protectors are especially designed for "Frsky Lotus stick ends" with a Ø12, which is a little larger than the standard Ø8 ones.

A lot of time and material went into designing these, so some support is always appreciated.

Check my entire design collection on Cults3d.com
https://cults3d.com/en/users/bopiloot/creations

2 versions inside: FFF and SLA

FFF 0.1mm layer height
If you don't mind cleaning up the traces of the support structure than these are the original files. I recommend a tiny round needle file to start with than finish with wet sanding.
And of course a touch of paint never harms the looks.

SLA 0.05mm layer height
These files have a closed bottom of 0,1mm to make sure they stick to the build plate. That layer is easily removed and the edges should be trimmed other than that some light sanding and some paint.

After completing the models glue in the magnets, nothing fancy some CA glue will do.

https://www.supermagnete.de/dut/schijfmagneten-neodymium/schijfmagneet-4mm-3mm_S-04-03-N

Happy crafting!!

p.s. you can always contact me if you want a finished pair!