Dragoon Storm (Complete Beyblade)

As of June 3, 2020, a new and improved remake of Dragoon S is available, but only on My Mini Factory. If you want parts that you can freely use with official beyblades, you must use the newer version found at the link. You can find it here:
https://www.myminifactory.com/object/3d-print-dragoon-storm-complete-beyblade-124002

This is a quite faithful recreation of the first generation beyblade Dragoon S, AKA Dragoon Slash. With the use of Tightskin's spin gear and blade base models, maximum interchangeability of parts after being printed is achieved due to glue not being needed for assembly. However, as was specified by Tightskin, the parts of the blade base, core, core shells, and pegs should be printed at a much slower speed than you usually would so that they will fit together.

This model comes with the same parts that the original Dragoon S came with, including the Reverse Dragon attack ring, the 8 Wide weight disk, and the Storm Grip Base. Included is a scan of the sticker sheet initially posted by Giga on World Beyblade Org, which you can print off of any regular paper printer.

Also credit to Mcup2 and UncleJoJo for the other base parts I used to make this bey.