June 28, 2019
Description
The purpose of this remix is to enable the spindle carriage to travel past the leadscrew coupler on the X axis. Doing this will provide an extra inch wide strip's worth of workable area running the length of the work surface.
Other things I've changed in addition to the notch:
-I enlarged the mounting holes for the linear rails by 1.66% (my experiences with the previous tolerances consistently led to breakage).
-I added 4 loops to the underside of the carriage. These loops are intended to accommodate a ziptie, the function of which is to keep the linear rails from falling into the work area in the event they were to vibrate downward. I understand this fear may just be paranoia on my part, so I've included STLs with and without these loops (V1=no loops V2=loops).
License:
Creative Commons - Attribution
nebajnim101
