Articulated PiCam Mount

Articulated camera mount for the Raspberry Pi Camera. I made this to mount a PiCam to my Ikea Lack enclosure. The brackets screw together to form articulation links allowing flexible orientation in 2 axes. Each bracket can attach to another bracket with M3 screws with 8 mm spacing.

Tested with the PiCam v2.0 camera.

Uses the following M3 hardware:

• M3 hex nuts - 3x per nut_side_bracket
• M3x25 cap head screws - 1x per articulation joint
• M3x8 cap head screws - 2x per bracket to bracket joint

I used this thing to manage the ribbon cable in my Lack enclosure: https://www.thingiverse.com/thing:3729953