The Calimero 4K

When I first saw the Caddx Tarsier 4K split type camera I knew I had to build a frame around it. My Sanchez carbon toothpick frame build with the Caddx Turtle HD cam worked out really well but for the Tarsier that just wouldn't do it because it comes with two boards instead of one, making the stack really high. So the solution was to make a 3" version of my 3D printed Calimero frame that allows to hide the boards inside of the frame.

The rest of the setup is pretty much identical to my previous builds:

• Beefy DYS 1404 6000kV motors on 3S 650 mah LiPos to provide way more than enough power for around 100g dry
• GEPRC 12A board to handle the amps
• Super compact HGLRC VTX and XM receiver to fit inside of the canopy.
• Gemfan 3035 props for super smooth jello free footage

Other misc parts:

• 4x M2x14
• 4x M2x12
• 16x M2x7 or M2x8 for the motors

Check out my Youtube Video for more facts and details on the build and follow my Instagram for frequent updates.

Please note: This is still a work in progress because I couldn't fly it yet. The ESC of the GPRC burned out while setting up Betaflight unfortunately and I have to wait for some replacement. My other GEPRC boards work fine so for the moment I'd give them the benefit of the doubt and assume it was just bad luck and not a general quality issue.
Since the weight of this build (100g) is in the same ball park than my Sanchez setup with the Turtle (86g) and has an identical powertrain I expect them to have a similar flight performance