Glock 17 Trigger Lock Holster w/ Molle Clip

EDIT #3 - Safety Update:
Do not use V1 with anything weaker than ABS or Polycarb. The molle retention clips are not big enough and could become stressed under flexion or torsion if you have a soft molle rig (as opposed to a hard solid plate). This means they could break while you're running/diving and you'd be rightfully upset.

Please use the V2 or V3 for much more reliable transport. V1 still works great if you just need it for a range bag or display piece, but during airsoft play it won't hold up.

EDIT #2:
Added a v3, which is even beefier than v2 for absolute faith in your holster gear. Uses the v2 trigger lock. Also added extra angles and slight modifications to the design to benefit the different angle. I tried to optimize plate carrier/thigh rig space as much as possible but stuff like this is going to take up some real estate.

EDIT:
Added a v2, which is WAY beefier. Ultra sturdy. Utilizes the same spring as a stock Ender 3 bed spring (M8x10, very high tensile compression strength. Not Orange spring heavy, but halfway there). Can assuredly secure a real-steel variant (but don't! because legal reasons and/or you might hurt yourself or something and i'm not responsible). Notice the extended plate at the bottom that makes it look vaguely like ovaries? That's so this thing provides its own counter-force to secure against a plate carrier and sit flat all the time.

Improved version of the original. Have not tested with anything other than a KP-13, but theoretically should fit every single glock on the market.

Comes with a horizontal molle clip design and prints in-place without issues. I recommend using a wide brim and PETG/ABS

The text at the top has lines that are exactly 0.4mm wide (convenient, right?)

Requires the following hardware:
M2x25/30mm bolt
M2 nut

m6x10-15mm spring

#Exercise proper gun safety. I am not responsible for any issues that should occur.#