June 24, 2014
Description
DDW96, original duplicator of the LV-30T Rocket Engine used in the KSPMBB set, has requested that I remove my tag from his model. Instead of downloading the Starter or Basic sets, please download all parts separately and use the "NoInitials" version of the rocket engine.
This idea's been on my mind for a while now. First of all, my thanks go out to "lilykil" and "DDW96" for the models themselves-- all I did was poke a few holes in them.
This is a set of printable KSP parts with tiny holes for inserting 1/4 x 1/16" magnets (these, specifically: https://www.amazon.com/dp/B00ILWZQTO/ref=cm_sw_r_cp_apa_FLSVBbJSAKBEY).
Print the parts, glue the magnets in place, and get your Jeb on!
Jebediah Kerman does not endorse KSPMBB's
Included in the Starter Set:
1x Mk1 Lander Can
1x FL-T400 Fuel Tank
1x LV-T30 Rocket Engine (Please download the "NoInitials" version)
1x Mk1 Parachute
1x Stack Decoupler
2x Radial Decoupler
2x RT-10 Solid Fuel Booster
4x LT-2 Landing Strut
Changelog
v1.01: Fixed radial decouplers, made landing legs more robust.
v1.02: scaled up slightly because the hole diameters were too tight.
v1.04: Scaled up further for more forgiving tolerances, made radial decouplers more robust. Added a simple tolerance test with three holes: center is with no adjustment, left is -5% scale, right is +5% scale.
License:
Creative Commons - Attribution - Share Alike
ahmedjaber
