July 5, 2019
Description
I couple of simple mounts for a Y-Axis Drag chain for the Cr-10S500.
I used this $16 drag chain:
UPDATE: I found that my original bracket drooped after about a year. So, I redesigned the bracket to bolt onto a 13x16mm U-shaped aluminum trim channel for 1/2 inch plywood I bought at Lowes. I drilled holes in the carriage beneath the bed and mounted it with locknuts to the bottom. The new version is totally rigid and will last the life of the printer.
If you have access to the aluminum channel, the only files you need are the FrameBracket and the ChainBracket.4. If you don't (or you are looking for a quick temp fix) then you will want the original ChainBracket.
License:
Creative Commons - Attribution
eebel
