Raspberry Pi 4 - fast printing case

I wanted a case that would print as fast as possible. It felt like lots of RPi cases are a bit over engineered for what I needed.

I tried to optimize this case by having all the walls and ceilings be a multiple of common nozzle sizes. To print this quickly, you'll want to either print 3 walls on a 0.40mm nozzle or 2 walls on a 0.60mm nozzle.

Similarly, the base of the model is 0.8mm so it should print as 4 layers at 0.2mm layer height.

All the holes are oversided so there shouldn't be any problem with plugs working.

I didn't make any GPIO holes but that's pretty trivial with tinkercad, if people request it I'll add it.