Switch Case 2040 Profil

For everybody who love the "click" nois! <3

This case fits perfect to the switch you can found behind the link below. The switch works with 12V and with 24V. You can assambly the case on every position of your 2040-Alu Profil, so you're free to choose the right position.

It works also on a 2020 Profil, but half of the case hang over the edge.

It is designed so that the switch is very easy to remove and with covers for all holes it looks perfect!

To remove the switch...

1. remove the Cover_Bottom
2. use a tiny screw driver or somthing else to press the secure of the switch
3. Pull the switch out

For the cablemanagement you can found a hole in the back. All cables can be inserted in the groove.
You have to remove one of the two lower screws to get the cable through the groove.
The case holds perfectly to the frame with just three screws.

---

Contact me if you have any suggestions for improvement or personal change requests.

Example switch found by Amazon (Germany)
https://www.amazon.de/OFF-Position-Snap-Wippschalter-schwarz/dp/B00WJLF8OQ/ref=sr_1_21?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=Kippschalter&qid=1562672026&s=gateway&sr=8-21

You can also use a switch fom other supplier.
Dimension of the hole: 28.5 x 10 mm