July 15, 2019
Description
A sleeve with a integrated rim for 6x1 1/4 inch tyres to fit on popular electric skateboard hub motors.
Fits the motor in the picture which is used on Meepo V2P, Meepo AWD GT, Wowgo 2S, Wowgo 3, Ownboard W1S etc.
I also made a version that fits the Backfire G2T motors.
Print with at least 33% infill and use 14 top layers for the top part to get the required strength for withstanding 70 PSI pressure. Also make sure to use a filament that has good layer adhesion. I recommend using PETG if you don't have the machine to print in Nylon or polycarbonate.
Requires replacing the standard screws with 5 pieces of M4x20 screws.
Edit:
Added a sleeve for popular chinese 6x2 inch tyres. This requires M4x35 screws.
License:
Creative Commons - Attribution - Non-Commercial
Rumpsvett
