Direct Drive E3D V6 BMG Ender3 / CR10 FDM parts Remix

Hello,

this is a Remix of the 2 main parts (optimized for FDM Printing) for my Direct Drive BMG Upgrade. The other Parts you can get from the Main Thing here. -> https://www.thingiverse.com/thing:3698659

I have printed the Parts with a Layer height of 0.2 and 15% Infill only to test the Printability.
For sure the Quallity will be better with a smaller layer height.

I think PETG is a minimum requirement for this Part because of the Temperature on the Hotend.

Because i don't use the Parts as FDM printed please let me know if something can be better so i can eventually implement an Update.

The Print Head do not work with the original Extruder Stepper it is necessary to use an Stepper with a max. length of 24mm otherwise the stepper will collide with the frame.