July 18, 2019
Description
Update: I have added a 2020 profile version of the outer ring. I have not printed it but I have little doubt that it will have issues.
Basic gimbal for the Zesty Nimble. It is designed to mount on the rear 2040 profile. Four 623zz bearings were used. Mount the middle ring with a two 16mm m3 screws mounted against and through the bearings to the nut on the outer ring. Then use two 20mm m3 for the center ring mount. Mount stepper bracket as standard.
Design influenced by Additive Detroit on Youtube.
Pictures are of prototype gimbal.
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
neebick
