July 23, 2019
Description
Made this replacement piece for my Roger, Vintner, Legacy Wine bottle opener. I have printed and tested V6 and it worked with a bit of convincing. I made some modifications to it and V7 should be a bit more printer friendly with the inside overhangs.
I printed V6 without any support and everything turned out ok but I did have some wild bits I needed to trim away due to the lack of support on the inside and out.
I would suggest printing V7 with support for only the outer overhang which is a necessary part of the design unfortunately.
I have also uploaded a two part design that can be glued together if you would prefer.
Printed at 100% infill. will update if the part fails.
License:
Creative Commons - Attribution
theanchored
