Hello Vekoj,

I allow myself to write to you because I printed this for my Zaribo 320 and i printed also all the other pieces from the MK3 REL3 of ZARIBO.

When Wolfgang announced it I saw your comment about this Z motor mount, which I put in my favorites for later.

A few days ago I finally made the update, with ZARIBO MK3 REL3 parts, your Z motor mount because the original one if I ever want to dismantle the mtoor I will have to dismount the heatbed, and I planned to install the Bear X Axis alpha 0.7, but I made a mistake in printing the alpha 0.7 and it was making a crazy noise on my Z axis bearings, so I left the alpha 0.6 which has the seem to work very well.

I printed calibration cubes, including that in 20mm, they printed perfectly.

Then I made a small impression not so tall, maybe, 4 cemtimeters maybe, and there, my layers in the direction of the X axis are shifted relative to each other, not much but it is not beautiful.

So I tell myself that can be the top of the engine mounts, which is the ZARIBO MK3 REL3 version is not in line with your Z motor mounts. So I will print your version of the upper part for Z motors.

Then I saw that you also propose an improved X axis of the Bear version,

So here are my questions, knowing that I am in ZARIBO 320 with the IR sensor and the Bondtech BMG extruder

1.-- Your version of the X axis, is improved from the version BEAR alpha 0.6? or to the most recent, the alpha 0.7?

2.-- Then, is all this compatible with the ZARIBO MK3 REL3 version where the Y-axis belt is vertical?

In advance, thank you for your answers and thank you for your work.

Best regards from France.

Z Motor Mount (3030)

Z Motor Mount (3030)

Related Models