Mini Roni (Modified for G18WE)

[EDIT 2020-06-11 : A lot of remark about the cocking handle window being too short, so I'm going to modify the design and put the files back online, be patient.

[EDIT 2020-05-07 : After many comments that you were having problems downloading the files, I re-uploaded them all by adding a .rar containing all the files. ]

This part is based on https://www.thingiverse.com/thing:3030223 from Mussy, in order to be able to use a G18 WE with its Mini Roni kit.

I tried Mussy Roni kit for my Glock 18 WE and had to make some modifications :

• I remove the magazine compartment to make a flat base on the bottom with hole to fix a rail, also the same as those on the sides.

• I modified the profile of the rail for a profile that I designed that fits on Gseries of WE, KSC and Cyma AEP replicas.

• I enlarged the window of the cocking handle because there was no enough space forward on the original version

I also published the modified cocking handle for a G18 WE : https://www.thingiverse.com/thing:3783788

I also published a stock adapter for M4 Tube :
https://www.thingiverse.com/thing:3783795

[EDIT 03-09-2019]
I added a version cut in half for printers with a bed less than 150mm.
This version is assembled with the block for the junction of the 2 halves, I advise you to glue it and to put rods or screws (M3) in the holes