Gillette Mach 3 / March 3 Turbo Shaver Handle

Gillette Mach 3 / March 3 Turbo Shaver Handle

A simple design that is quick to print without the need of support materials.

I designed and printed this as an emergency when I lost my shaver and I still have many replacement blades. You know how expensive these things are..

It's should be a snug fit but if you have problem fitting it onto your razor, try softening the tip with a lighter. It works wonder! It is meant to be a quick/temporary replacement so it isn't going to be as good as the original. You can probably use with new blades, or you can discard it and print a new ones each time you switch blades.

I find that it prints better at 0.2mm or thicker layers if you are printing without supports. If you do need to generate supports, flip the handle upside down so your print will turn out better. I find 50% infill or more is ideal, or at least 30%

Please help to leave a "like" and comment if you find this useful. It motivates me to design and upload to share it with the world for free :-)

Check out my profile for other cool stuff you may like!

Kiki Tay