SCX 10 II FORD 32 Hotrod

This will fit the SCX10 ii frame, I have added it to my deadbolt RTR, the wheelbase shouldn’t matter on this model.

I have used the original cab file from Ossum and a remixed it, its 20% lower and the roof is cut out and added the magnet mounts. I have used the truck bed from Voodoobrew but remix it a bit so that the shocks will work with out hitting the truck bed.

I also used the roll cage from Voodoobrew but remixed it to fit the bed on this truck. The engine used on the battery box is also from the Voodoobrew design, I don`t have an exhaust added in the design yet due to the shock placement, but it will be added later.

Everything is printed and tested on my SCX10 ii frame and work, tolerances are added to the parts so you can print them as is. I have done what I could to reduce use of support.
The roof is hold on by 4 magnets integrated in to the roof and 4 magnets in the cab.

Roof magnet dimensions = 6mm dia 1mm high
Ford Cab magnets for roof = 6mm dia 1mm high

The battery box lid is hold in place by 8 magnets on the box and 8 magnets on the lid (overkill)

Battery box lid dimensions = 6mm dia 2mm high
Battery box dimensions = 6mm dia 2mm high

The front is designed to fit the aluminium front beam bracket for servo relocation. (Front Beam Bracket Bumper Mount Metal for 1/10 Axial SCX10II 90046 RC J6J8)

Added an Axial SCX II servo relocation bumper, so that people don`t have to buy one.
You can find it here:

https://www.thingiverse.com/thing:4173121

Added a fuelcell for electronics:

https://www.thingiverse.com/thing:4700980