AnyCubic Chiron Purge Bucket (Stepper Mounted)

IT WORKS GREAT! The saving of material is HUGE !

add stopper on left side for x limit switch. make sure it doesnt move !
Includes stopper and dump box files.

AnyCubic Chiron Purge Bucket East Side Mounted over the stepper motor on the X Axis Bracket

I realized having the bucket on the right side of the bed made a bottom release door implausible as the pieces would probably get into the control box for those of us who left the control box in place as i would expect most people to do. So to fix this i simply routed the debris with a sloped angle and a completely removed the one side. This will dump the debris into a garbage can that i will locate underneath it, maybe an old margarine container or something for smaller prints as a run off collector.

this bucket has been cleaned up and a prototype is currently printing on my CR-10S thats heavily upgraded and only gets used with ABS.

like others i have left the slot in the side for a piece of silicone and ill line the run off shoot with aluminum tape for less friction and more sliding to reduce the risk of build up and to literally wipe the nozzle as it travels into and out of the bucket area.