Silicone Sock Mould for Slice Mosquito Hotend

This is a mold for making Silicone Sock insulators for the Slice Engineering Mosquito heater blocks.

There's currently 3 varieties posted depending on the kind of nozzle you're using and the style of sock you want:

• Slice: Made for the Slice Engineering nozzle. Covers the nozzle except the very tip
• E3D: Made for the E3D OEM nozzle. Covers the nozzle except the very tip
• Ken's Custom: This version should work with either nozzle, and leaves a hole for the nozzle instead of covering it

You'll need a high-temperature silicone to work with, either a two part mixture, or an RTV single part will work. I used this kind

Other supplies:

• Latex gloves
• Disposable bowl/dish
• Dish Soap
• 2x M3 12mm screws
• Optional but very helpful: 1½" Ratcheting C-Clamp

Check this post for instructions on how to use this mold

Check out my other socks for other hotends:

• Version 1 - CR-10 Stock Hotend
• Version 2 - CR-10 Stock Hotend
• Version 3 - CR-10 Stock Hotend
• OEM E3D Hotend
• Clone E3D Hotend
• Generic Mk8 Hotend
• Generic Mk10 Hotend
• E3D v5 Hotend
• Promethius v1.1
• Lulzbot Hexagon