Dranzer Spiral (Complete Beyblade)

So uh, I think Thingiverse image handling is just broken right now. None of the images load on this page, biut you can still see them all by expanding them and clicking "View Original". No clue how to fix it, but at least the thumbnail shows up correctly. Edit 8/19/19: Nope, it was just really slow. As in, several days to fully process slow.

This is a quite accurate remake of the plastic generation beyblade Dranzer S, AKA Dranzer Spiral. For the most part, it uses the exact same parts as the original. It has the Double Wing attack ring, 8 Balance weight disk, and Spiral Change Base. Said blade base ended up being more complicated than usual to facilitate the ability to switch between metal-sharp and hole-flat modes. Either way, it's recommended that the parts of the spin gear and blade base should be printed at half your usual speed.

That being said, there are a couple intentional deviations from the official design. Firstly, it's set up to use standard spin gears, meaning users aren't forced to use what is effectively a standard right spin gear. Additionally, because the original mode change operation requires a spring to operate and could be knocked between modes during battle, I made my own mechanism. This becomes locked in place when the spin gear is attached, so there is no risk at all of mid-battle mode change.

Credit to TightSkin, Mcup2, and UncleJoJo for the templates I used to create this.