September 1, 2019
Description
This is a fully 3d printed dust shoe to use a Dremel 3000 in combination of the rBot https://www.thingiverse.com/thing:1195229
For more instructions, pictures and videos please visit:
https://www.instagram.com/reittec/
To print the bristles I used a nylon Filament and a 0.4mm nozzle at a layer height of 0.3mm.
To create the broom I used 7 layers of the bristles.
The base and the mounting bracket are connected with the mounting_plate by using M5 screws and nuts. The tube has an outer diameter of 16mm.
License:
Creative Commons - Attribution
reitter_m
