PanelDue 7i case for E3D ToolChanger

Required items:

• M3 tap
• 8 x M3 10-12mm screws

Tap the screw posts in the Case Top with an M3 tap. Screw holes in the Case Bezel and Case Bottom are designed for socket head M3 screws. The bottom should fit the front of the ToolChanger bottom plate snugly, but not too tightly. The idea is to either leave it like that if you want to pick it up occasionally, or to use a double-sided tape to fix it in place.

Case Bezel screws through the PanelDue into the Case Top, and then Case Bottom screws into the Case Top.

You won't need support for any of the parts if your bridging game is spot on, otherwise, the middle (Case Top) part will need very light support for the SD card slot.