August 19, 2019
Description
Update Painter Pyramide V2!
I’ve made a few minor updates to my original design. The new version is now interlocking, as shown in the pictures. Additionally, I’ve introduced a second variation with a flat top.
The pointy version is ideal for harder materials and is useful when flipping a part while the paint is still wet, as it leaves smaller marks. The flat version is designed for painting heavier objects or when working with softer materials, as the pointy version can leave impression marks when pressure is applied from above.
Other than the height, the dimensions remain unchanged.
« Links »
Link to video: Here’s a short video demonstrating that three of the flat-topped pyramids can support up to 80 kg of weight:
https://youtube.com/shorts/NuWcdzu4RmA?feature=share
This paitners Pyramide helps you to lift your work piece, so you can paint it direcly from both sides. The pointy top ensures minimal surface contact.
The pyramides are stackable, so they don't require much space, when being stored.
Each pyramide has a ground plate of 60mm x60mm and a height of 45mm.
Printing Parameters
Support No supports required
Print Speed 50mm/s
Infill 20%
Travel-Speed 100 mm/s
Nozzle-Temp 210 °C
Build plate Temp. 60°C
Layer Resolution 0,15 mm
Nozzle Diameter 0,4 mm
Print Time 53 min
Filament PLA Orange
Amount of Filament 7 g
Used Printer Anycubic i3 Mega
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
Ideenlabor
