Prusa MK3S Enclosure with Pi Mount and Cable Chain

Somebody asked me to merge my cable chain variant of the MK3S case with the remixed raspberry pi3 mount, so here you go.

I probably won't get a chance to test this anytime soon, but it all looks right and everything fits.

Update 8/19/19
After a test print I found the upper tooth was oversized to the receiving hole from the original model, so I fixed that in rev B.

Update 8/20/19
I found some time to test the installation, and all worked as I had hoped. The top stud didn't fit as well as I liked, so I fixed that in rev C. Tested and verified, this project is complete.

Update 09/04/19
I rolled this out to 16 prusas without issue. This is probably the best mod out there, as the pi 3 (or better) blows the pizero out of the water. Add a farm front end: https://git.notexpectedyet.com/NotExpectedYet/OctoFarm/src/master/README.md
...and you have a factory!