Ender 3 Case SKR 1.1 / 1.3 with SKR and Octoprint Logo

I created an customized version of the Ender 3 control box with the SKR and Octoprint Logo on the top covers.This is for my particular use but i also wanted to share it with all my design

Everything should fit I've tested it on a virtual model of the Ender 3

When printing the covers you can pause at the layer before the logos are printed and change the filament in order to print them in different colors

If you don't know how to do this an quick search on YouTube or Google will give you the answer how to print multiple colors on a printer with only one extruder

This design is modular, neat, quiet and offers better cable management than the factory design. There's also enough room for other stepper motor drivers with large heat sinks using the SKR Board

You can mount an SKR 1.1 / 1.3,Raspberry Pi,2x LM2596 buck converter and mosfet for the heating bed

Note that you will need some feet for the printer of course you can use whatever you like I used these ones: https://www.thingiverse.com/thing:3109537

(This will cover up to 3.5 mm Jack of on the Raspberry Pi, but I don't use it so it's fine)

If you found my Things useful, treat me to a cup of coffee : https://ko-fi.com/deiandex98