August 22, 2019
Description
03-12.2019 Adedd reinfoced rod hangers I recommend using those.
11.09.2019 Updated bowden tube corner guides.
Great spool holder for 4 standard size spools using Ikea samla 22L box.
It can hold 4 spools 20cm/7cm, like the ones prusa petg comes in, It will be a tight fit tho.
Parts needed:
16x 608 bearings
2x 8mm threaded rods cut to 337mm
4x bowden tube fittings 10mm thread
some bowden tubes. I used 4x 1.2m
strong double sided tape and fine sand paper
optionally higrometr
This awesome samla clips: https://www.thingiverse.com/thing:2110134
Remixed parts:
IKEA Samla Quick Change https://www.thingiverse.com/thing:2873244
I've used the rod hangers, but made them more stable by extending them a little.
Bowden tube pipe plug from:
https://www.thingiverse.com/thing:2850984
Added second hole, it's now possible to close the tube even if there's now filament inside.
Higrometr mount is made for prusament spools - 50mm wide hole and 8mm deep.
Higrometr: https://www.banggood.com/pl/Analog-Hygrometer-Cigar-Humidity-Calibration-Gauge-With-Glass-Lens-for-Humidors-p-1368440.html
It was locally available and size was right. It's not the most accurate one but gets the job done.
License:
Creative Commons - Attribution
madalpaca
