Laser Cut Ubiquity Unifi AC Pro Mounting Plate

Mounting plate for the Unifi AC pro wireless access point. Designed to attach to a cable tray using 4 cable ties (50mm spacing), or a single pipe or conduit using 2 cable ties.

I cut it out of 5mm plywood, but the material and thickness aren't particularly important for this application.

There are versions with and without a slot engraved for the cable ties to sit in. The inkscape source file is also included.

Assembly:
Remove mounting ring from access point.
Thread cable ties through holes in mounting plate.
Attach mounting ring to mounting plate using flat head or low profile machine screws and nuts.
Twist mounting ring back on to access point.
Tighten cable ties onto cable tray or conduit.