September 3, 2019
Description
Can be used to cover your M5 nut and screw. Creates a much cleaner look on the inner side of door or drawers.
The cover should sit tight on your nut. If for some reason it fit to tight or is to loose, you might need to scale it for your needs.
Dimensions:
Height: 11mm
Outer Diameter: 15mm
Inner Polygon for the Nut between two flat sides: 7,9mm
Printing Parameters
Support
Yes
Print Speed
50mm/s
Infill
20%
Travel-Speed
100 mm/s
Nozzle-Temp
210 °C
Build plate Temp.
60°C
Layer Resolution
0,1 mm
Nozzle Diameter
0,4 mm
Print Time
15 min
Filament
PLA Orange
Amount of Filament
1,2g
Used Printer
Anycubic i3 Mega
License:
Creative Commons - Attribution
Ideenlabor
