Improved Cable Chain Angle Mount Ender 3 (Pro) (V1)

FOR THE ENDER 3 V1!
It does not fit the V2

Edit V1.1
Thanks to Tekkin (https://www.thingiverse.com/tekkin/about) there now is an improved variant for both the stock and the aluminium extruder! Here the connection to the horizontal chain is strengthened (as it was quite weak before).
Note from Tekkin: Support for the cable clip falls down at around 70%, skirt will be helpful to keep supports up throughout printing. 50% infill makes it sturdy enough.

Edit
Added alternative horizontal cable chain

Fusion360 file is now added!

---

Really liked the idea of the original designer (thing:3623342), however, it was a bit too weak for my liking and I used another horizontal cable chain for the hot-end.

Requirements:

Original cable chain:
https://www.thingiverse.com/thing:2920060

Horizontal Cable Chain:
https://www.thingiverse.com/thing:3802593

'Simpler' Horizontal Cable Chain:
https://www.thingiverse.com/thing:4032011

It can be printed with the flat side down, support on 'everywhere', but the vertical part (in printing orientation) does not need support!

If you'd like the original file, let me know!