bLab PSU Cover and wiring

This is a power supply mount designed for a 30x30 aluminum frame but I imagine it can be used on many other situations.

I was looking for a way to mount the power supply (dimensions: 200mm x 110mm x 50mm) on an AGraber 30i printer I'm building but couldn't find anything the way I wanted. So I designed this.

This design have two parts. The "Lower Cover" is bolted on the lower horizontal bar of the frame and have an IEC power connector and an on/off switch. It also have large venting holes. More on that later.

The "Upper Belt" is just for holding the PSU firmly on the frame. It wraps the PSU and is bolted on the vertical bar.

Please see details below.

OBS: Notice the dimensions before printing this. Not every 360W power supply measures the same.