Spinning Reel Display Stand

**** Spinning reel display stand ****

Great for drying your freshly rinsed reels, or for just simply an aesthetically pleasing display piece.

All parts should be printed flat to the bed, with the arms, the notch for the cross member should be face up. Please see slicer photo.

4 perimeters were used to create good rigidity of the arms. 5 or above 'top' and 'bottom' layers are recommended

The stand can be press fit perfectly fine, but you can add some adhesive (2 part Epoxy, or CA 'Superglue'. If using CA be sure you can press fit it in time before it sets! Always check before gluing!

Happy printing and tight lines!