It is difficult to install 14mm width FPV cameras in the X2-ELF frame kit due to its narrow space between two front standoffs. Therefore, I designed this camera mount to accommodate the Caddx Turbo EOS2 FPV camera, which has a relatively large lens in its class.

Details for the build

Specification

1. Camera Tilt:
   • 0-45 Degree Adjustable
   • 45 Degree Fixed
   • 30 Degree Fixed
2. Fixed angle version doesn't need screws, so I also provided no_ear version

Note

1. When using 45 fixed angle version, DO NOT over-tight the screw if you notice the top plate is pressing the lens too hard. There are two solutions for this case.
   1. Try 30 Degree or "Adjustable" version
   2. Try to add a nylon washer to slightly increase the height and protect the lens.