TTGO T-Beam Case for Version T22_V07 and T22_V1.1

This is my design of a TTGO T-Beam Case. There are two versions of the top part, one for a version with display and one without.

You need some additional small screws. 4 to hold the board on the top-part and 2 on each side for closing everthing together.

I printed it without support. Therefor I rotated the top part so it starts with the side, where the usb-mini port is. The right and left parts can print with the flat side down. The best way to print the back part is to print it on one of the sides where the left or right will fit. So printer can go upwards.

I designed this thing for my version T22_V07. I still added the parts for version T22_V1.1. As I don't have this newer version, I couldn't check the fitting accuracy and am grateful for any hint.

I put the Fusion360 file in as well. If you have newer versions of the T-BEAM you can modify it to yout needs. Or send me a newer version of that board with different pinout to my home and I will do it. ;)