350mm x 350mm Bed

This bed has been designed to provide a 350mm x 350mm printable area, for use on printers like the BLV MGN cube. It has been made to work with a three point levelling system, with holes made for m4 screws.

I plan to mount this bed using these threaded ball ends: https://www.banggood.in/16Pcs-10-M4-Threaded-Steel-Ball-Rod-Ends-For-Kossel-3D-Printer-Magnetic-Joints-p-1003375.html?cur_warehouse=CN

The bed itself is 390mm x 360mm x 6.5mm including mounting sections and has a groove to fit a thermistor, compatible with the options used for the railcore and similar.
Please note, I can make this bed to different thicknesses upon request. Due to how I have made the source file, I can very quickly alter most parameters if needed.

For a heater, it is planned to get a 350x350mm silicone heater (possibly from Keenovo).
I have found Keenovo already make 350x350mm heaters, so even better. They are available through their aliexpress site.

The plan is to setup a BLV MGN cube with a solution similar to these:
https://www.thingiverse.com/thing:3699630
https://www.thingiverse.com/thing:3805932

If you like and/or use this bed design, please like and feel free to donate. :)