• Models
  • Contests
  • Slicer
  • Login
  • Start Here
    thingiverse-iconprintables-iconcults3d-iconmakerworld-iconmyminifactory-icon

    3D GO

    3D ModelsContestsCollectionsSaved ModelsOn a mobile device?

3D GO

Privacy Policy
Gatehunter Neo 3D Printer File Image 1
Gatehunter Neo 3D Printer File Image 2
Gatehunter Neo 3D Printer File Image 3
Gatehunter Neo 3D Printer File Image 4
Gatehunter Neo 3D Printer File Image 5
Gatehunter Neo 3D Printer File Image 6
Gatehunter Neo 3D Printer File Image 7
Gatehunter Neo 3D Printer File Image 8
Gatehunter Neo 3D Printer File Thumbnail 1
Gatehunter Neo 3D Printer File Thumbnail 2
Gatehunter Neo 3D Printer File Thumbnail 3
Gatehunter Neo 3D Printer File Thumbnail 4
Gatehunter Neo 3D Printer File Thumbnail 5
Gatehunter Neo 3D Printer File Thumbnail 6
Gatehunter Neo 3D Printer File Thumbnail 7
Gatehunter Neo 3D Printer File Thumbnail 8

Gatehunter Neo

Dave_C_FPV avatarDave_C_FPV

October 4, 2019

thingiverse-icon
DescriptionCommentsTags

Description

The Gatehunter Neo is an all new performance frame designed for setups with 20x20 stacks and bigger motors (2207 and more). Using only 20x20 stacks made it possible to design this frame to be very aerodynamic and light (66g). The increase in top speed and acceleration is absolutely noticeable and it corners like there are no laws of physics holding it back ;-)

Please note: Be very careful to only maiden these setups in a safe open space. Especially on 6S, the betaflight stock PIDs are way too high and the flight controller might accelerate the quad uncontrolled. I recommend reducing them all by 30-40% to start with and then work you way up to da good tune.

Frame Specs:

  • 5" stech X
  • 66g including everything
  • 20x20 stacks only
  • 16x16 motor mounts
  • 19mm cams or 14mm with adapter
  • Canopy designed for Micro Axii FPV antenna

My recommended high performance Setup
(only 255g w/o LiPo despite the massive motors!)

  • Motors: Rcinpower 2207+ 1860kV
  • FC/ESC Stack: Diatone F722 Mini 6S 30A
  • VTX: Eachine Nano 400mW
  • Nano Cam: Foxeer Predator Nano
  • Batteries:GNB 1100mah 6S

More 6S capable 20x20 stacks:

  • Holybro Kakute F7 Mini
  • iFlight Success F7 Mini

Budget (but still good) Micro cam options:

  • RunCam Nano 2

The best 2207 budget motor options:

  • Emax ECO 2207
  • iFlight Xing E

Required Steel Hardware:

  • 8x M3 nuts (not locknuts)
  • 6x M3x14
  • 2x M3x18
  • 1x M2x8 (to secure the canopy in the rear)

Required Carbon Parts:

  • 4x Arms (5mm)
  • 1x Bottom Plate (4mm)
  • 2x Top Plate (2mm)
  • 1x Brace (4mm)

https://www.youtube.com/watch?v=3bF9UyYnASo&t=8s

License:

Creative Commons - Attribution - Non-Commercial

Related Models

TicTac Gun preview image

TicTac Gun

3DPatriot profile image

3DPatriot

18,352

Voron 2.4 / Trident Canopy preview image

Voron 2.4 / Trident Canopy

PrintSomething profile image

PrintSomething

476

H0 Treppenüberdachung für H0 Bahnsteig preview image

H0 Treppenüberdachung für H0 Bahnsteig

R24 profile image

R24

44

VEND - the totally printed candy dispenser preview image

VEND - the totally printed candy dispenser

Mr_MegaTronic profile image

Mr_MegaTronic

10,314

BetaFPV AIR65 TPU Canopy preview image

BetaFPV AIR65 TPU Canopy

WE are FPV profile image

WE are FPV

114

The Flow (compatible with Brio and Lillabo system) preview image

The Flow (compatible with Brio and Lillabo system)

Tele profile image

Tele

6

3D Printable RC Spitfire (Original) preview image

3D Printable RC Spitfire (Original)

rikesh_dhirajlal profile image

rikesh_dhirajlal

7,292

Voron 2.4 tophat with integrated touchscreen preview image

Voron 2.4 tophat with integrated touchscreen

nagelwerkstatt profile image

nagelwerkstatt

154