October 1, 2019
Description
Simple low cost 3D printed Tailwheel for Foam Board RC Planes by Flite Test.
Designed to glue on the fuselage tail end with some flexibility by using linkages, so steering controlled by the rudder.
Only 6 parts required.
1 Flexible pivot bracket
2 Steering Link
3 Wheel Wishbone
4 Rudder Gide
5 Axle
6 Wheel
Eeay to put together and glue.
Rudder gide clips on and the pin moves linkage to turn the wheel.
License:
Creative Commons - Attribution
JKilbys
