Waffle Stand Etagere

This stand helps to keep your waffles separated and lets them become crusty.

I recommend PETG because it's more heat resistant than PLA. For 12 holders you need a 6mm threaded rod with a length of 22,8mm. I used 18mm MDF for the base (diameter 13cm) and painted it black. For holding the rod in the base I drilled a 5mm hole, cutted a M6 thread, screwed the rod in and countered it using a M6 nut. The holders are fastened with two M6 nuts on the upper end. The nuts are covered with caps. Three felt gliders at the bottom avoid scratches on the table.