Power MacPi

i migrated to Printables: https://www.printables.com/social/192980-the_craft_dude/models

• If you want to see a video of this case printed, then head over to Action Retro and check out his video: https://youtu.be/wLh7c6KQAT4

after almost a whole year, I have finally managed to finish this raspberry pi case (thanks to stress and depression -_-" )

The case supports both the pi 3 and pi 4, but I have only made an io shield for the pi 3, since I really couldn't find any pi 4 STLs as an templete.

• The case fits The Ice tower raspberry pi cooler, a 40mm fan (no Max hight), and front usb (with a little cable management bracket/shield to help with the wires to the fan and front usb, and protecting them agains the blades on the fan)

• The case opens up like the real G3.

• you also have the ability to run your cables through the opening on the back of the case if needed.

• I have made a PDF file to show how it is assembles, please note that a many of the parts have to be glued in place.

(There are many parts to print, and some of them requires a big printer like the Reality cr10, but a smaller simpler version will be made in the future.)

if you have any problems printing this, please let me know