October 10, 2019
Description
Print follow the number if you want
1_fondo
2_crocedisco2
3_crocedisco1
4_filetto
5_testa
6_bottone
I raccomend brim for every piece
Support is necessary only for 'crocedisco1': rotate it 180 degrees with the thread facing the print plate. Even the 5_testa piece may be needed depending on your printer.
0.2 resolution is almost good
After print you must use glue (like attack) for attach 'crocedisco1 & crocedisco2'.
the remaining parts are screwed
License:
Creative Commons - Attribution
Blinn
