Tonuino case

Implementation of the tonuino project: https://www.voss.earth/tonuino/

Parts used:

• 24mm arcade buttons
• poweradd slim 2 powerbank -> broken open to access 5V USB (top plate needs quite some force to remove, is friction fit)
• 50mm speaker
• standard "19,2 x 12,9 mm" switch for the 5V from the powerbank
• M3 Nuts and bolts (nut inserts)

** Important ** since the original PCB didn't arrive in time a 70x30mm protoboard like this was used:
https://www.amazon.it/Basetta-Millefori-Vetronite-piastra-Prototype/dp/B075W1H2TL

Also you may want to use a powerbank that is easier to misuse... I basically cut mine open

After assembly a piece of felt was cut to size and attached via double sided tape, on the felt a stitched cross marks the RFID patch

Update after a couple of months:

• Add hotsnot to the speaker and any other things that have mass (powerbank)
• use proper jumper wires with 1/10" molex style connectors, those chinese ones with round plug are too thin
• use proper wires in general