Power supply mount for Raspberry Pi (Step down board mount for 2020/4020 profile)

This is a simple mounting bracket for a step down board.

It can be used to create a 5V power supply for your Raspberry Pi, but it can also be use for many other purposes.

Mounting can be done with 2 pcs M4 screws and T-nuts/hammer nuts.
The board can me mounted with 2 pcs M3 screws. They wil tap into the plastic.

This was created for a XL6009 step up/step down board. Not all boards have the same mounting points so i can not say anything about the compatibility of your board and this mount. The size of my PCB is approx 49 x 23,5mm if it helps

Mount to a 2020 profile, 4020 profile or any other mounting points that you like.

This design is universal but was also optimized for providing power to a Raspberry Pi in a Anycubic Kossel Lineair Plus. All other mounts for this purpose can be found in the links below:
Raspberry Pi mount: https://www.thingiverse.com/thing:3912074
Accessory switch mount: https://www.thingiverse.com/thing:3912189

Hope you like this design. If you have any questions let me know, and if you like what i do, follow me for new designs.