PanelDue 7i Front Panel for BLV MGN Cube

I found out the hard way that an original PanelDue 7 (without controller), is NOT the same footprint as a PanalDue 7i with integrated controller, so I remixed some stuff together to make a front panel that works.

Design isn't my strength, so I hacked together an existing minimal PanelDue 7i design into the two-part front panel section that BePrint made for the BLV MGN Cube.

I decided to leave in the extra walls from the slim case, in the front panel design as additional protection for the screen.

You will need to change to a L bracket on the front corner near the screen or grind a notch into the gusseted corner bracket from the BOM.

This is split per BePrint's split design that'll print on an Ender 3's bed size.

To print a full front panel you'll also need to print the rest of BePrint's PanelDue 7 design, as well as the lower grill parts from the BLV MGN Cube BOM.

Enjoy!