RCBS Rock Chucker primer slot plug

Do spent primers like to escape out the front of your Rock Chucker ram when you're decapping? This plug will fix that.

To install:

1. Raise the ram.
2. Slide the plug in from the front until it is sunk below the outer surface of the ram.
3. Lower the ram.
4. Use a dowel (or some other long piece of material) to gently tap the plug down. The bevel on the plug will slide it into place, flush with the surface.

It's a pretty tight fit to the ram, so it may stay in place just from friction. If not, the plug has two recesses in it that will take 5mm x 2mm circular magnets.