Segway Ninebot Max G30 Dashboard Lock [non-commercial license!]

New rule due to sellings of my design without proper credit:
Selling the prints of my Designs is only allowed for 10% revenue via my Thingiverse Paypal.me/bllfrnd Link and good visible listing of the link to my Design!

Segway Ninebot Max G30 Lock for use with long Padlock to prevent others to turn on your scooter and connect to the scooters bluetooth. Not suitable as theft protection on it‘s own, always use a proper (bike)lock aswell.

Four different versions: 5mm, 8mm, 10mm thickness and full cover with 8mm thickness.
1mm thicker towards the opening and opening 2mm more narrow.

I had no long padlock on hand for the picture. Version of the added files are more rounded than the first printed version in the picture.

Compatible Padlock e.g. ABUS 64TI/30HB60

V1.2: Holes for the lock moved upwards for 1mm less play. ~1mm left for padding between printed part and display.
Slope revised.
V1.2.1: fixed 5mm and 10mm Version of V1.2 errors

V1.0 8mm full cover added
V1.1 of 8mm full cover with weakening, just in case someone uses the front part as a lever. With the weakening of the front part, it hopefully brakes of before the holes do.
V1.2 added with further weakening of the front part for less material usage on the front part: Mostly thinned to 2mm.
V1.3 round cutout for the handlebar was to close to the front, corrected.
V1.4 small error fixed that could cause problems.
V1.5 bigger slope, less material and printing time needed. Holes for the lock changed from 7mm to 10mm width. Cutout for the handlebar widened and smoothed.