October 21, 2019
Description
Simple guide to selecting the right screw size when joining material together using pocket hole screws.
The design was created to print the first 2mm in one colour and the remaining in a contrasting colour the make the font nice and readable.
This applies to both the base and the top wheel. Example white base for 2mm, colour change in slicer at the 2mm mark for blue.
Repeat on the top wheel as well. Alternatively print in one solid colour.
The top cap is designed to just sit in place with a bit of superglue underneath the cap.
License:
Creative Commons - Attribution
TaylorsMake
