October 21, 2019
Description
I used several ones from the Thingiverse but overtime, the hole in the connector got enlarged and lost it's grabbing power, leaving my PTFE tube dangling all over the place.
This connector lets you increase the holding power if it ever gets lose.
Print at 0.15 layer height and 4+ perimeters with around 20% infill.
OD in the file name stands for "Outer Diameter", select the base according to your PTFE tube's outer diameter.
Print the gasket with TPU, it's optional but recommended for airtight seal.
License:
Creative Commons - Attribution
zerocorebeta
